Sunday 27 December 2015

Nikon 300mm f/4E PF used on Nikon 1 cameras

In the start of 2015, Nikon announced the Nikon 300mm f/4E PF VR. However, it was not until the end of 2015 that it became widely available. The new lens supersedes a lens with similar specifications, but brings a lot of new technology to the table:

Vibration reduction (optical image stabilization), electronic aperture control (E), and, not least, a Phase Fresnel lens element (PF) which makes it possible to build the lens much smaller and lighter than before. Canon has used this technology for years, and they call it "Diffractive Optics" (DO).

This lens is a moderate telephoto prime. However, I think many Nikon 1 fans will see it as an alternative to the native Nikon 1 70-300mm f/4.5-5.6 as an ultra long tele lens, at 810mm f/4 equivalent, using the Nikon FT-1 adapter. How does this work? In this article, I aim to find out and make the choice easier for you.

Here is what this combination looks like, with the Nikon 1 V3 camera:


Note the optional Nikon RT-1 tripod mount ring. Do you need this tripod collar? I would say not really. If you use the Nikon 300mm f/4E lens on a DSLR, you can use the camera's own tripod mount. After all, the lens is not very heavy.

And if you use the lens on a Nikon 1 camera, you can use the tripod mount included in the Nikon FT-1 adapter. I got the optional Nikon RT-1 tripod collar mostly for affixing a strap, as I don't like carrying the combo in the Nikon 1 camera strap eyelets.

Here are the two lenses compared. As you see, the Nikon 1 70-300mm f/4.5-5.6 can be collapsed for transport, and is very compact in this way:



When extended, and with the supplied hoods mounted, the Nikon 300mm f/4E PF VR becomes the shorter of the two, due to the Phase Fresnel technology. Note that I have mounted the Nikon FT-1 adapter to the lens below, for the most relevant size comparison, and it is still shorter!


Nikon 1 70-300mm f/4.5-5.6 (left) and Nikon 300mm f/4E PF VR (right). In the background is the Sigma 150-600mm f/5-6.3 Sports for DSLRs

In the picture, I also included the Sigma 150-600mm f/5-6.3 Sports for DSLR cameras. When used on a crop DSLR, it has an equivalent reach of 900mm, and is a compelling alternative as an affordable ultra long tele lens. For that reason, I am including it in this comparison, even if I don't use it on Nikon 1 here. I have previously written about using this enormous lens on Nikon 1, and you can read about it here.

Specifications


LensNikon 1 70-300mm f/4.5-5.6Nikon 300mm f/4E PF VRSigma 150-600mm f/5-6.3 Sports
AnnouncedMar 13, 2014Jan 6, 2015Sep 12, 2014
Weight560g755g2860g
Diameter63mm89mm121mm
Length (including Nikon FT-1)108mm148mm (178mm)290mm
Front lens thread62mm77mm105mm
Lens elements/groups16/1016/1024/16
Equivalent focal length range190-810mm810mm (on Nikon 1)230-900mm (on APS-C DX format)
Image stabilization switchNoYes: Off/Normal/SportsYes: Off/Mode 1/Mode 2
Focus switchNoYes: "A/M", "M/A", and "M"Yes: "AF", "MO", and "MF"
Focus delimiter switch2 modes: Full/Limit (7m-infinity)2 modes: Full/Limit (3m-infinity)3 modes: Full/2.6m-10m/10-infinity
Minimum focus distance1m1.4m2.6m

Using the 300mm PF on Nikon 1


When mounting the Nikon 300mm f/4E PF on a Nikon 1 camera with an FT-1 adapter, it behaves mostly like a native Nikon 1 lens. With some exceptions:

  • You cannot use the AF-A focus mode. Only AF-S and AF-C are available.

    I don't see this as a major limitation. If you are photographing a bird inside twigs, for example, you will need AF-S for the best accuracy. In AF-A mode, the camera may choose to re-focus while you are re-framing the picture. And for fast moving objects, I don't think that AF-A quickly enough changes to continuous autofocus: You must set AF-C from the start anyway.
  • Only the centre autofocus spot can be used. Hence, you can only focus on items in the very centre of the image frame.
  • The camera will not autofocus during video recording.

It could be that future Nikon 1 cameras will change this, but all Nikon 1 cameras to date have these restrictions.

Further, if you are used to using Nikon DSLRs, the lens behaves in differently to what you might expect in these two areas:

  • On DSLRs, the Vibration Reduction (VR) is only activated when you half press the shutter. When using it on a Nikon 1 camera, the VR is activated all the time, as long as the camera is powered on.

    This is consistent with native Nikon 1 lenses, and probably drains the battery somewhat quicker.
  • If you stop down the lens, it will use the specified smaller aperture even before you take the picture, up to f/5.6. If you set an aperture smaller than f/5.6, then it will stay at f/5.6 until you snap the photo. This is unlike DSLRs, where the lens retains at f/4 until you actually take the picture.

    Native Nikon 1 lenses also behave in the same way: Setting any aperture larger than f/5.6 leads to a change also during live view and autofocus.

Image quality


To test the image quality, I have put the lenses on a tripod, with a shutter delay for the most stable shots, and used a low ISO. With the two Nikon lenses, I used the Nikon 1 V3 camera.

And with the longer Sigma lens, I used the Nikon D3300 DSLR. While this is the least expensive Nikon DSLR, it does have the most recent 24MP APS-C sensor from Sony, so the image quality should not be an issue. I used live view for the most accurate CDAF focus.

Here are results at various focus distances. Short focus distance (about 2.5m):

Nikon 1 70-300mm f/4.5-5.6Nikon 300mm f/4E PF VRSigma 150-600mm f/5-6.3 Sports

First, let's note that the angle of view is slightly different between the two first lenses here, even if the focus distance and focal length is the same. What's going on here, is that the focal length is always specified at infinity focus. Closer to the minimum focus distance, the focal length may vary. This is especially common for internal focus lenses. This phenomenon is often called "focus breathing".

Here are 100% crops from the upper left part of the images, for better comparison:


We see here that the Nikon 300mm f/4E is the best lens. It is quite good already wide open, but improves further when stopping down to f/5.6.

These were taken at medium focus distance, about 25m:

Nikon 1 70-300mm f/4.5-5.6Nikon 300mm f/4E PF VRSigma 150-600mm f/5-6.3 Sports

Here are 100% crops from the centre of the images, for better comparison:


This shows that the Nikon 300mm f/4E is the best contestant here. It is not optimal wide open at f/4, as one could expect, but it becomes very good at f/5.6.

As for the Sigma lens, I think the focus must have been slightly off here, as I have certainly seen it sharper earlier.

I also took comparison images at a far 60m distance, and they confirmed the same trend, that the Nikon 300mm f/4E is the best of the lenses in terms of sharpness.

Chromatic Aberrations (CA)


When I tested the Nikon 85mm f/1.8G on Nikon 1, I found that while Chromatic Aberration (CA) effects are automatically removed by in-camera processing in Nikon DSLRs, they are not when using it on Nikon 1.

With this in mind, I was rather happy to see that CAs are no problem at all when using Nikon 300mm f/4E on Nikon 1. I interpret this to mean that the lens corrects for CAs optically, with no need for software corrections.

Flare and bokeh


One disadvantage of the Phase Fresnel construction is more proneness to flare. This can be a quite important issue with long lenses, as flare can kill your contrast if you have a strong light source in the background, e.g., the sky.

To test this, I have taken a picture with a bright background with both lenses, for comparison. Click for larger images:

Nikon 1 70-300mm f/4.5-5.6Nikon 300mm f/4E
f/4
f/5.6

The exposure is slightly different here. But beyond that, I don't think there is any issue with flare or loss of contrast with the 300mm f/4E lens. The bokeh also looks quite good with both lenses.

Focus speed


The focus is usually quite fast with both lenses. When I use the Nikon 1 V3 camera, I start seeing the focus becoming annoyingly slow at around EV10 with the 300mm f/4 lens, which corresponds to f/4, 1/60s, ISO 1600. So this is already quite dark.

In these situations, the camera will more often hunt back and forth across the whole focus range, suggesting to me that PDAF is not functioning, and the camera is reverting to CDAF.

Here is a "studio" focus test at EV12, in which I pitch the two lenses against each others. I placed a subject 3 meters from the camera, and timed the focus. Both lenses were set to around infinity when starting the test.

See the comparison here:



The results are summarized here:

Lens
Focus delay
1.07s
0.55s
0.78s

We see here that the Nikon 300mm f/4E is much faster than the native Nikon 1 70-300mm lens.

I would have expected the other way around, to be honest, as the CX 70-300mm lens is designed for use specifically on Nikon 1 cameras.

Further, we see that the 300mm lens gains some focus speed when stopping down. This is natural, as a smaller aperture requires slightly less focus accuracy. As I mentioned earlier, when using the lens on a Nikon 1 camera, the camera will stop it down during autofocus, up to f/5.6. This is unlike when using it on DSLR cameras.

The 300mm f/4E features a light, high frequent ticking sound when the focus operates. This is not going to be audible for anyone besides the photographer, so it doesn't bother me.

Both lenses have focus delimiter switches, and I certainly recommend using them, when you have subjects far away. That is going to increase the focus speed significantly.


For birds in flight, I prefer the native Nikon 1 70-300mm f/4.5-5.6 lens. For three reasons: The aperture f/5.6 is more than sufficient for me, since there is normally more light available when birds are out in the open.

Also, only the centre focus point is usable with the Nikon 300mm f/4E PF, which means that you must keep the bird in the very centre of the frame to get the focus right. This can be tricky. Finally, the native lens is lighter, and easier to point around for a longer time.

Read more about using the Nikon CX 70-300mm lens for birds in flight here.

If you do want to use the Nikon 300mm f/4E for birds in flight (BIF) on a Nikon 1 camera, I suggest stopping it down to f/5.6. That will make the autofocus quicker, and, as the camera uses f/5.6 during liveview, it makes it easier for you to see birds slightly out of focus through the electronic viewfinder.

Image stabilization


All the lenses here have optical image stabilization, Nikon calls it "Vibration Reduction". I think it is hard to compare them in terms of effectiveness. But I certainly see that enabling the VR function on both the Nikon lenses does improve the stability.

Based on my experience, I could guess that the Nikon 300mm f/4E is slightly better at stabilizing the image, but I couldn't say for sure.

Here is a collection of videos which I recorded handheld with the Nikon 300mm f/4E on the Nikon 1 V3 camera, with VR enabled. I had no support whatsoever.



Can you identify the bird species?

I deliberately rendered these videos without any software stabilization in post processing, to show you how they look like straight from the camera.

This illustrates the effect of the Vibration Reduction: You can fairly successfully handhold the camera while recording video, despite the 800mm equivalent reach. If I had used software stabilization in addition, the videos would have been very good.

Example images


All the pictures were taken handheld with the Nikon 1 V3 camera.

ISO 1600, 1/200s, f/4:


Detail at 100%:


ISO 1100, 1/500s, f/4.5:


Detail at 100% crop:


Other uses of the lens


If you are considering to buy this lens for use as an ultra long tele on Nikon 1 cameras, you may worry about the future: Is Nikon going to continue the Nikon 1 lineup or not? There appears to be some uncertainty to this.

With this respect, it is good to know that there are alternatives. You can, for example, get 1.4x tele converter and use the lens on a crop camera like the Nikon D7200.

That gives you an equivalent reach of 300mm x 1.4 x 1.5 = 630mm at an aperture of f/5.6. With a DSLR, you'll have access to using all the focus points, and the AF-C subject tracking is very good.

Also keep in mind that this lens is one of the, still, relatively few E-lenses. That means that there is no aperture lever in the mount, the aperture is set electronically.


Nikon 85mm f/1.8G to the left is a G-type lens, and has the lever for camera actuation of the aperture mechanism. The Nikon 300mm f/4E on the right is an E-type lens, and does not have this lever

As the mount is completely electronic, this means that the lens is very futureproof. As new mirrorless mounts are launched, it is likely that fairly inexpensive adapters will appear for mounting this lens as well. For example, Commlite has an adapter in the pipeline for Sony E mount.

Conclusion


The Nikon 300mm f/4E works very well on Nikon 1 cameras. It operates much as you would expect, and the image quality is very good. Used at around f/4.5-f/5.6, the results are top class.

I bought the lens to have a low light alternative to the native Nikon 1 70-300mm f/4.5-5.6 lens, not because I think the native lens is problematic in terms of image quality. I think it is just fine.

But the f/5.6 means that I have to go home earlier than the other guys when photographing birds in the evening. Adding one more stop with the Nikon 300mm f/4E sure does help!

The lens is not ideal for birds in flight, as you must pinpoint the bird in the very centre to achieve focus, but for stationary birds, it works very well.

The lens did meet my expectations, and I am happy with the results.


Further reading


Nikon 1 70-300mm f/4.5-5.6 review

Birds in flight with Nikon 1 70-300mm

Sigma 150-600mm f/5-6.3 Sports

Comparison between CX and DX sensor size for bord photography

Using SIgma 150-600mm f/5-6.3 Sports on Nikon 1

Thursday 3 December 2015

Most 1 lenses have plastic bayonets

People interested in photography tend to be quite conservative, and camera equipment is often judged by aspects which might have been relevant some generations ago. For example, the amount of visible metal on a camera or lens is often taken as a sign of quality, even if, in reality, it is not. Especially the lens bayonet mount is often examined.

Below, we see basic kit zoom lenses for Nikon DX DSLR cameras (left), and for Nikon 1 (right):




Beyond the size and mount difference between them, there is one difference that many notice: The DSLR lens (left) has a plastic (nylon) bayonet mount, while the newer Nikon 1 CX lens has a metal bayonet. And this fact is often noticed by online reviewers, stating that all Nikon 1 lenses have metal mounts.

So, Nikon have taken the feedback from the users and put more metal on the lenses? Everybody should be happy! Except that this is wrong: The bayonet mount is not metal, it is chromed plastic.

If you feel the bayonet with your fingers, you will easily feel that it is not a metal material. However, you don't need to trust my feeling. To prove this to you, I am presenting some photographic evidence, as you should expect.

Here are two pancake Nikon 1 lenses: The red one is the Nikon 1 10mm f/2.8, one of the few CX lenses which does have a metal bayonet. On the right is the same Nikon PD 10-30mm f/3.5-5.6 as above.


You can notice that the metal has a different shimmer in this image: The right hand bayonet has a more matte, dull toned look. Closeup images reveal further differences:

Nikon 1 10mm f/2.8Nikon PD 10-30mm f/3.5-5.6

Even closer images to help you see the difference:


To the left, you can see the tooling marks from the genuine metal bayonet of the red 10mm lens. This further illustrates why a metal mount is so much more expensive: It needs to go through a number of finishing processes to get the right shape.

On the right, you see the chromed plastic mount of the kit zoom lens. There are no tooling marks at all, but the bayonet has marks from the plastic molding process. Also, there are some parts of the chrome finish which have chipped off.

Conclusion


Most Nikon 1 lenses have a chromed plastic bayonet mount. There is nothing wrong about this, in my opinion, plastic is a completely adequate material for a small lens mount.

It is a bit sad that Nikon feel they need to hide the fact that the bayonets are plastic. But this is probably a very rational decision:

If it had been uncovered plastic, they would have gotten many poor online reviews, saying that the lenses have a poor build quality. Which would have been an unfair comment. Also, the chroming may decrease the friction when mounting the lens, and, hence, improve the life span of the bayonet.

There are some Nikon 1 lenses still which do have metal bayonets: The Nikon 1 10mm f/2.8 (seen here in red), the Nikon PD 10-100mm f/4.5-5.6, the Nikon 10-100mm f/4.0-5.6, the Nikon 32mm f/1.2 portrait lens, and finally, the Nikon 70-300mm f/4.5-5.6 long tele lens.

The Nikon FT-1 mount adapter also has a metal bayonet.

Also, the waterproof Nikon 1 AW 11-27.5mm f/3.5-5.6 lens does have a metal bayonet. I haven't seen the Nikon 1 AW 10mm f/2.8 lens, but given that it's non-waterproof sibling has a metal bayonet, I would guess that this one also does.

Beyond these exceptions, the rest of the Nikon 1 lenses have plastic bayonet mounts.





Sunday 18 October 2015

Nikon 85mm f/1.8G on Nikon 1

By using the Nikon FT-1 mount adapter, you can connect Nikkor F mount lenses to a Nikon 1 camera. Most newer lenses work well on Nikon 1 cameras, in the sense that you can operate the aperture as usual, and you can also use the autofocus. When using an adapted lens, you can only use the centre focus point, and you cannot use the AF-A mode. Otherwise, it is mostly like using a native Nikon 1 lens.

It still doesn't make sense to use any Nikon F lens on a Nikon 1 camera. I would only bother if the Nikon F lens is one of:

  1. Fast (large aperture)
  2. Very long (tele, large magnification)
  3. Macro (close focus distance)

A lens in the first category is the entry level fast portrait lens, the Nikon 85mm f/1.8G. To understand why an 85mm lens is called a portrait lens, you can read this article.

On a Nikon 1 camera, this lens becomes equivalent to 230mm f/1.8, due to the 2.7x crop factor. Such a lens can be interesting for various purposes, for example low light photography in concerts or theatres. Here you see the Nikon 85mm f/1.8G mounted to the Nikon FT-1 (to the left), compared with the native CX 70-300mm f/4.5-5.6 to the right, mounted to the Nikon 1 V3.


Tuesday 25 August 2015

Nikon 1 AW1 underwater preparation

The Nikon 1 AW1 is a very unique camera. It is the only interchangeable lens digital camera which is waterproof. In this sense, it is a continuation of the Nikonos series of interchangeable lens underwater film cameras.


And when I say "waterproof", I don't mean "weatherprotected", like many premium system cameras claim to be. "Weatherprotected" usually just means that there is are simple gaskets wherever there are joins in the body material. This keeps out some drops of water, but it is nowhere enough to protect against submerging. The Nikon 1 AW1, on the other hand, is truly waterproof in the sense that it can be taken 15 meters below water.

However, what is somewhat undercommunicated, is the amount of care you must spend time on for the camera to actually be waterproof. People who do diving will be familiar with this procedure, but the layperson may think that you can just grab the camera and go snorkelling. No, you can't.

Friday 7 August 2015

Infrared conversion of Nikon 1 S1

Digital cameras have gotten very good at representing the reality the way the human eye sees it. Several key indicators have gotten better, for example, colour accuracy, resolution, dynamic range, noise performance, lens rectilinearity, etc. All this to make your pictures look more natural.

But there are times when you want to take unnatural pictures. I have written about such examples previously. One way to take unnatural images, is to photograph outside of the visible light spectrum, usually infrared.

Back in the film days, you could buy specialist film which was sensitive to infrared light. Normally, you would combine this with a visible light blocking filters, somewhat confusingly referred to as "infrared filters", to put in front of the lens. These filters block the visible light you see with your own eyes, only letting through infrared light. That way, you can photograph outside of the colours that you can see yourself, for interesting effects. These filters usually have a cut-off wavelength of around 650nm or higher, see the illustration below.


With digital cameras, this is somewhat simpler. The sensor itself is able to see infrared light, so you can use the normal live view process to compose your image, and even use autofocus. However, virtually all digital cameras have a strong infrared blocking filter built in. This is to avoid stray infrared light hitting the sensor, which would reduce the contrast.

Some specialist digital cameras come without the infrared blocking filter, for example the newly announced infrared version of the Fujifilm XT1. This camera is "full spectrum", meaning that you must yourself add a visible light blocking filter to the front of the lens to achieve the infrared effect. However, at a price of US$1700, this camera is not for everyone.

A cheaper option is to take a digital camera you already have, and convert it. This can be done by third party companies, or, if you are adventurous and dexterous, you can do it yourself. In this article, I show you how to do this with the Nikon 1 S1, an old, basic Nikon 1 camera. Contrary to what you may expect, this camera is serviceable, and you can disassemble it to access the filter stack above the sensor.



Wednesday 8 July 2015

Sigma 150-600mm Sports on Nikon 1

When I first tried the Sigma 150-600mm f/5-6.3 Sports on the Nikon 1 V3 using the Nikon FT-1 adapter, I was unhappy. The focus accuracy was very poor, leading to unusable results.

However, after the Nikon 1 V3 firmware upgrade this spring, the focus issue was gone, and I found the lens to be much more usable on the Nikon 1 camera. Here is how they look when mounted. The FT-1 adapter is between the camera and lens:


Of course, I wouldn't recommend buying this lens solely for the use on Nikon 1. But if you already have a Nikon DX or FX system, you may consider sharing the lens with a Nikon 1 camera as well.

But how does it perform? Do you get any real reach benefits over using the much smaller and more portable Nikon CX 70-300mm f/4.5-5.6 (my review)? After all, if using the enormous Sigma 150-600mm Sports does not give you any more details, it is better to leave it at home and bring the CX 70-300mm. To find out this, I have compared them.

Sunday 10 May 2015

FT-1 third party lens compatibility

The Nikon FT-1 adapter allows you to put F-mount lenses on Nikon 1 cameras. When it comes to using Nikon brand lenses on the adapter, there is an official list of compatibility from Nikon.

However, when it comes to using third party lenses, there is no official list or support from Nikon. To help you decide which lens to get for using with the Nikon FT-1, I have made a list of lenses from Sigma and Tamron, describing how they work on Nikon 1 cameras. This was tested using the Nikon FT-1 with firmware 1.2, and the Nikon 1 V3 with firmware 1.1. Future firmware versions may yield other results.


About the results: I first describe if the lens works on the FT-1. A "no" here means that you cannot use the lens at all on the adapter. The camera repeatedly shows a message saying "check the lens", and there is a clicking sound from the lens. You can not even use the lens for manual focus. You can, however, mount the lens using a dumb adapter without any electronic contacts at all.